A Guide To Garage Door Repairs On Your Kansas City Home
When you’re looking to get your garage door repairs done, you don’t want to go into the process blindly. Knowing what’s damaged, what needs to be done, how much it’ll cost, how long it will take, and the details of the entire repair process are all key factors in making an informed decision.
Garage Door Repairs – What You Need to Know
In this guide, we’ll take you through the most common garage door repairs, and tell you exactly what needs to be done.
Hiring A Contractor For Your Garage Door Repairs
If you’re not comfortable tackling garage door repairs on your own, it might be worth hiring a Kansas City garage door repair service. Contractors usually have the necessary tools and equipment to get the job done correctly, and they are more likely to have experience with specific types of garage door repairs.
Costs associated with hiring a contractor will vary depending on the severity of the issue and how much is needed to fix it.
Track And Roller Issues
When your garage door doesn’t close properly, it can be due to a number of things. Track issues can be caused by ice build-up on the tracks, which can cause them to jam when the door is opened. Roller issues can be the result of worn-out rollers, or even broken springs.
In either case, fixing these problems usually involves replacing the track or the rollers. If only one side of your garage door isn’t working properly, that side may just need a new spring.
Garage doors rely on springs to open and close. When these springs break, they don’t provide enough resistance for the door to close properly. This can lead to problems with your garage door opening and closing smoothly, as well as trouble with your security system sensors recognizing when you’ve entered or exited your home.
If you notice that your garage door is sticking and won’t go all the way up or down, this could be an indication that one of your springs has gone bad. In most cases, replacing just one spring will fix the issue.
Track And Roller Troubleshooting Guide for your Garage Door Repairs
Tracking: If you notice that your garage door is not opening and closing smoothly, first check to see if there’s any ice build-up on the tracks (it’s especially important to clean this off before winter comes). If there’s no ice buildup and the problem persists after cleaning off the tracks, chances are that something is wrong with the track itself – in which case you’ll need to replace it completely.
If only one side of your garage door isn’t working properly, chances are that just that side needs a new spring – though in some cases both sides may need new springs if one side has been affected more than another. In any case, follow our guide on how to replace a spring.
Garage Door Doesn’t Close Completely
If the door just won’t close completely, it’s likely that one or more of the hinges is broken. To determine if this is the case, try manually closing and opening the door several times – if it opens all the way each time, then the hinge is likely broken.
Troubleshooting Guide For Hinges
If you are experiencing trouble with your garage door, it is important to troubleshoot the issue first. This guide will help you do just that.
When troubleshooting a garage door, start by inspecting the hinges. If they appear to be functioning properly, but the door won’t open or close smoothly, there may be something blocking the movement of the springs or cables. In this case, you’ll need to remove whatever is causing the obstruction and re-install the hinges accordingly.
If your garage door doesn’t seem to open from the inside at all, there may be a problem with one of the springs or cables. In this case, you’ll need to replace both the spring and cable. Be sure to consult an expert if you aren’t sure which part needs replacement; they will be able to tell you exactly what needs fixing and how much it will cost.
Other Common Garage Door Repairs
Garage door problems don’t always necessitate professional help. If you’re experiencing issues with your door that seem to be related to general wear and tear, there are a few things you can do on your own.
First, try spraying lubricant on the tracks and hinges to help them move more smoothly. Second, clean the garage door regularly using a pressure washer or a hose with a degreaser. Finally, make sure the door is properly aligned so that it opens and closes evenly.
When it comes to your garage door(s) and repairs, be sure to consult an expert. Doing so will help keep your garage doors in good condition and functioning smoothly.
Other posts you might enjoy:
The Cost to Replace a Garage Door
Why Your Garage Door Design is Important
5 Common Garage Door Scams You Should Know
Leave a ReplyWant to join the discussion?
Feel free to contribute!