There was a time when few people had the luxury of air conditioning units to cool their homes in the heat of the summer. People would use other means to keep the summer’s heat out but otherwise endure what the season dealt us. Now that homes come with air conditioning systems as part of the design, people are less able to handle summer’s heat, especially in Colorado Springs, CO. It would be challenging to get through the sweltering summer seasons without the cool air of an efficient AC unit.
In saying that, adequate care and upkeep of the equipment are essential in ensuring no downtime during the height of the extreme temperature.
Why Your Colorado Springs AC Unit & Thermostat Stopped Working
Employing a trusted, well-established AC repair contractor like
Without the efficiency of a thermostat, the AC wouldn’t be operational. The two go hand-in-hand. Let’s look at some common thermostat issues.
What Are Some Common Colorado Springs CO AC Thermostat Issues
In today’s society, it’s vital to have an efficient air conditioning system installed with a well-qualified, trusted AC repair contractor performing preventive maintenance to ensure the equipment is optimally functional, especially the thermostat, a primary component of the unit’s operation.
The thermostat is responsible for monitoring the overall household temperature and keeping it controlled. This part of the system develops its own set of problems that need handling for the unit to operate. Go here for details on why a thermostat might not work. Check out a few of these issues.
Achieved set temperature
If the thermostat isn’t getting to the temperature, there could be varied reasons for the problem, including:
Multiple sensors are responsible for keeping the thermostat functioning. If the temperature isn’t achieved, there could be damage to the sensor creating an inaccurate reading compared to what you set. Fixing these can be a challenge, with the recommendation often being to replace the entire component.
2. Poor location
The situation of the thermostat can create issues with the way the component reads the temperature. If there’s sun or heat exposure, the reading might be higher than how the rest of the house feels, and the opposite will be true if it has exposure to extreme cold.
The recommendation is typically to have these placed in a hallway or a neutral space where the temperature will represent the home.
3. A dirty component
When there is dirt, dust, or other particles accumulating in the component, which happens over the course of time, it can create functionality issues, particularly if one or more of the sensors become blocked, causing a misreading.
That requires taking off the cover to clean the interior with an exceptionally soft cloth to eliminate the particles. Gentleness is essential to avoid damaging fragile wires within the unit.
The household temperature and the thermostat setting don’t match
A second common problem is the setting not matching the household temperature whether it is cool or hot. If the component isn’t reading the accurate temperature, there will be challenges in keeping the air conditioning system regulated.
This can again be related to the thermostat being dirty. Keeping the component clean will impact the reading significantly. Other possible problems:
The electrical elements could be inefficient due to corrosion in the unit, which could require an “electric contact” cleanser to attempt to correct the issue. Some aged components might need to be replaced.
2. Installation issues
Some issues come from the installation process. This can happen if there is poor temperature reading or it is positioned too close to the ground.
The component doesn’t switch the temperature
If you can’t change the thermostat’s temperature, it can become frustrating, but there are troubleshooting techniques you can employ to figure out the issue.
1. Locked component
Most digital systems comprise a lock feature, so only one person has access to adjust the household temperature. If the component doesn’t allow a change in the household temperature, the lock could be engaged. Disable the feature to see if that resolves the issue.
2. Auto mode
If auto mode is on for your thermostat, this means the system will not allow manual alteration to the temperature. The system will operate based on how it was previously set. If you want to change it, the system needs to be set on “cool” or “heat” so you can adjust it manually.
A trusted, well-qualified repair contractor servicing your Colorado Springs, CO, home can diagnose your thermostat if it’s not working in any capacity. Perhaps it’s an aged unit, possibly a few other considerations like no power supply to the thermostat, particularly if a fuse is blown or the batteries are dead, maybe the circuit tripped.
You might also have some loose wiring, standard with an older component. The repair contractor will inspect the unit’s interior to check the wiring for corrosion or if it has become detached.
When efficient and functional, the thermostat will work with the air conditioning system to keep your home at the temperature that makes you comfortable, cool, and ready to handle the summer heat.
Dig This Design is an international blog about ALL things DESIGN for your home or business. Consider this your go-to resource to explore the latest ideas, find inspiration, and dream about possibilities
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.