Home > Design Architecture > Repairing Concrete – It can Be Simple

Concrete refers to more than just pavement or a flooring solution. Concrete is a mixture of water and minerals which harden after it has been spread over a surface. Many people think it’s impossible, but repairing concrete can actually be quite simple. Concrete can harden in odd shapes if incorrectly applied, but it becomes entirely stationary and strong with time. Therefore, people use “concrete” as a term to indicate strength.

Repairing Concrete is Easier than it Seems

Types of Concrete

Repairing concrete - the two main types of concrete.

Image Source

Even though concrete is generally strong, there are some types which aren’t as structurally stable. There are many different kinds of concrete, however, there are two main types which characterize most modern building applications. These two types are porous and nonporous concrete. Porous concrete will absorb water over time, which puts the structural integrity at risk. Nonporous concrete generally won’t absorb water. However, if you use a poor adhesive between the flooring you’ve chosen and the concrete, you run the risk of trapping water. This is bad for the property value.

Nonporous concrete is normally more expensive, and you’re not as likely to see it in a commercial, industrial, or residential building application. This concrete is usually found in a tunnel going through a mountain or beneath a channel of water. Otherwise, concrete mixed with porous pockets is okay for building, assuming that it will be properly covered. That being said, the concrete doesn’t necessarily have to be covered by carpet, tile, rubber, or anything else. Concrete can be finished a variety of ways to make it a stylish indoor addition to any home. In order to ensure it doesn’t leak, simply finish it with a particular agent that keeps water from intruding.

Sourcing The Best Waterproofing Solutions

Sourcing the best waterproof solutions when repairing concrete.

Image Source

You don’t need to make huge changes to the floors of your home so that your concrete won’t retain water. According to Formulators.com, their concrete repair utilizes “…a patented moisture-cure technology warranted to be completely waterproof and insensitive to maximum pH levels of 14.” This means you simply apply adhesive, not totally new floors. You can also redo the floor in a way that will increase property value and stability. Even the best options are going to require a bit of refurbishing every couple of years. By increasing the strength of the flooring, you can reduce the expenses of refurbishing in the future. When it comes to the operation of large businesses in commercial and industrial buildings, this can be fundamental to maintaining profitability. When you’re working in residential applications, the savings can be just as important.

Parting Considerations

Parting considerations when repairing concrete.

Image Source

There are two final things to take into account when considering the proper adhesive to apply between concrete and the flooring you’ve chosen: the environment and warrantied service. When choosing a refurbishment expert for repairing concrete, it should come with warrantied service if they make any errors. Additionally, environmental responsibility is important for you, your property, and your local community.

Other Posts You Might Enjoy

Concrete for Floors, Shower Walls, and More!

Graphic Inlays Is Just One of The Many Possibilities When Designing With Concrete

Heated Floor Systems – What You Need To Know

How to Select the Perfect Limestone Tile for Your Kitchen Floor

Leave a Reply