Is your air conditioning unit not cooling properly? This issue gets on the nerves of homeowners especially during hot summers. However, sometimes, the cause of this problem isn’t severe or too costly.

In most cases, the cooling capacity of air-conditioning units is reduced because of a dirty air filter or unclean outdoor unit. There are numerous AC repair experts, such as https://www.lappeheatingandair.com/ac-repair-mt-vernon-in/, in charge of resolving AC breakdowns.

If this interests you, we invite you to continue reading to learn how to repair your unit by yourself.

3 Ways to Repair Your Air Conditioning With Ease

3 Ways to Repair Your Air Conditioning With Ease

1. Dirty air filter.

One of the most common air conditioning issues for residents of Mt. Vernon is a dirty air filter, which prevents the unit from cooling properly. AC filters get unclean and clog due to a build-up of dirt and dust. Additionally, they restrict the airflow and decrease the units’ efficiency. Dirty filters might even interfere with the work of the thermostat, and block the passage of cold air through the ducts.

Moreover, a dirty filter can even make the evaporator coil freeze. Therefore, homeowners should change their filters periodically and follow the recommendations of the manufacturer for the frequency of maintenance. The usual recommendations are to replace filters between three and twelve months, depending on the frequency of using the system and whether you keep pets in the house.

In most cases, air conditioners show signs of malfunction because of a dirty filter. The process of replacement is quick and straightforward. First, you need to locate the filter, as the location differs across units. Once you find it, make sure to check the size printed on it. You should turn the power off for your own safety.

After turning off the power, you should remove the old filter and check its condition. If it’s completely clogged with dust and dirt, it’s time to replace it. If it’s not clogged yet, you should rinse it and leave it to dry completely. You can even use a vacuum cleaner to vacuum the dust. The ultimate step is inserting the new or cleaned filter by following the arrow on its frame. Make sure the arrow points towards the air handler mechanism.

2. Dirty outdoor unit.

Another air conditioning problem that Mt. Vernon residents frequently deal with is a dirty outdoor unit. When your outside unit is unclean, the work of the entire system decreases. Homeowners should understand the process of air conditioning in order to learn how the outdoor unit hampers the cooling process. First, the evaporator, referring to the indoor unit, absorbs heat from the indoor environment and transfers it to the outdoor device.

The condenser, which stands for the outdoor unit, transforms the heat into cool air. Nevertheless, if the condenser is clogged, the AC system won’t cool properly. In such cases, dirt and debris are responsible for blocking the heat transfer. The solution is to clean the condenser by removing all dirt and weeds surrounding it. Check out some tips for cleaning an air conditioning condenser.

Furthermore, you should make sure no plants crowd the compressor. There should be between two and three feet of space between the compressor and the plants for airflow not to be obstructed.

3. AC won’t turn on after a power outage.

Some residents of Mt. Vernon might be surprised to see their ACs aren’t working after a power outage. Even if electricity is restored, your air conditioner might refuse to work. There’s no reason to panic, as you need to follow a series of steps for the unit to come back on. The initial step is to switch off the thermostat.

The following step is resetting your circuit breaker. During a power surge, it’s possible for the AC circuit to overload, leading to a tripped breaker. Make sure to look for the circuit breaker box in your basement or garage and find the breaker with an air-conditioning label. If the switch is off, your job is to flip it back on. Wait approximately half an hour before turning the thermostat switch to cool.

In conclusion.

These easy tips can restore your air conditioning unit back to normal so, give them a try! If you have any questions or suggestions, we always love to hear from you in the comments below. Also below are links to more fantastic articles about ALL things DESIGN for your home or business.

Images Courtesy of Canva.

3 Reasons to Install Air Conditioning in a Queensland Home

AC Repair Service Buckeye AZ – Air Conditioning Repair In Buckeye, Arizona

How To Find The Right Air Conditioning Repair in Boise, Idaho

AC Repair Hobbs New Mexico – Get Air Conditioning Repair in Hobbs

Share This Story, Choose Your Platform!

About the Author: Ashley Edwards